Servicing all of Florida
Call us today
for a FREE quote

South Florida
(786) 379-5843

Tampa Bay
(727) 351-2697

Licensed & Insured


Roof Repairs and Installation

If you’re thinking about roof repairs or installation, there are a few things you need to know. In this article, we’ll cover everything from the types of roofing materials to the different roofing styles. We’ll also give you some tips on how to choose a roofing contractor and what to expect during the roofing process.

By the end of this article, you’ll know everything you need to know about roof repairs and installation.

Roof Repairs Checklist

Before Roof Repairs – Thoroughly Inspect Your Roof

When it comes to roof repairs or installation, the first step is to thoroughly inspect your roof. This helps you determine the extent of the damage and the best course of action.

Check the roof for cracks, missing shingles, and any other signs of damage.

Before roof repairs, you should also look for leaking water, growing vegetation, clogged gutters, or damaged flashing. Taking the time to make sure your roof is in good condition will help you avoid costly roofing repairs in the future. Once you have properly inspected your roof, you can move on to the next step. Make sure to keep a watchful eye on your roof in the future and take note of any changes over time. Regular inspections can help to catch minor issues before they become major repairs. Doing this can ultimately save you money in the long run as well.

Vanquish all the debris

After properly inspecting your roof, the next step before roof repairs is to make sure it is free of any debris. This is important because debris can trap moisture and cause further damage. Clean out any leaves, twigs, dirt, or other debris from between shingles and along the eaves and gutters. You can also use a wire brush or even a broom to help remove any debris that may have gathered. Once you’ve removed all the debris, you should make sure to clear away any flammable material, such as leaves or debris from your attic. This is an important safety precaution and could potentially save your home from a devastating fire. If you’re uncertain about the safety of certain materials, consult a professional before you start.

Roof Repairs Require That You Know Your Roof

When it comes to roof repairs and installation, you need to know what kind of roof you have. Different types carry different weight limits and require different installation techniques. Knowing your roof type can save you a lot of trouble and confusion in the long run. For example, asphalt roofs require different installation methods than metal roofs. Asphalt roofs need more nails per shingle and must be placed further apart. Knowing the differences in installation methods can save you time and money. Take the time to read up on the different types of roofs and their installation specifics.

Patch any holes or cracks

Before you start with the roof repairs or installation process, you’ll need to make sure any holes or cracks are patched and filled correctly. If left unchecked, water can penetrate through and cause extensive damage to your home. Pick up some roof cement or tar to patch up any holes or cracks that you find. If you need to make any repairs to the actual roofing materials, make sure to read up on the specific steps for the type of roof you have. For example, you may need to use roofing nails or sealing adhesive to patch a wooden shingle roof. If you’re unsure, contact a professional roofer with experience in your roof type.

Measure and cut your new shingles

There’s no doubt that replacing your old shingles with new ones can give your roof a facelift. You should measure each section of your roof so you know exactly how much material you need. Make sure to take into account the size of the gap between each shingle; even the smallest difference can have a big impact on the overall look of your roof. Once you’ve purchased your new shingles, you’ll need to cut them to the correct size as well. When it comes to roof repairs, be sure to measure twice and cut once. Take your time and ask a professional roofing contractor if you’re unsure of how to properly install your new shingles.

Apply roofing cement

The next step of process of the roof repairs is to apply roofing cement and to help secure the new shingles. Depending on your type of roof, the method and amount of cement you use can vary. Start by applying the cement along the nail line. Work in 3-foot sections and spread the cement evenly with a trowel. Once you’ve spread the cement, it’s important to make sure that it dries properly. Follow the instructions on your particular cement product for the suggested drying times. This can range anywhere from 2 to 12 hours. Be sure to check the drying time and make sure to allow enough time for the cement to dry completely.

Prime the flashing

Some areas may need flashing to help keep water from entering your home. If you’re unfamiliar with flashing, it’s a thin metal sheet that’s used to seal any gaps between the roofing material and the structure of your home. Make sure to start by priming the area where the flashing will be installed. Before you start, read the instructions and make sure you know the correct procedure for your flashing. If you’re unsure, consult a professional regarding roof repairs. Installing flashing incorrectly can cause water to seep in and cause disastrous damage to your home. Make sure to take your time and follow the directions carefully.

Apply a base course of asphalt felt

Before you start installing roof repairs and installation of the new shingles, you’ll need to install a base course of asphalt felt on your roof. This provides a base layer of protection from the elements. Apply the asphalt felt in strips across the roof, overlapping each strip by at least 4 inches. The felt will act as a barrier against water and will help to keep the shingles in place. You can purchase asphalt felt in rolls at any home improvement store. Again, if you’re uncertain about the correct procedure, make sure to consult a professional roofer.

Install the new shingles

Now comes the fun part – installing the new shingles! Make sure to follow the manufacturer’s instructions for the particular roofing material you’re using. Start at the bottom edge of the roof and work your way up. Make sure to leave a gap of at least 1/4 inch between each shingle. Nail the shingles in place.




Go to Top