When it comes to waterproofing work, you want to make sure that the job is done correctly and will last for years to come. To ensure that your waterproofing work stands up to the test of time, there are a few steps you can take to ensure its long-term success. In this blog post, we’ll explore how to ensure that your waterproofing work lasts.

Check the weather forecast

When preparing for waterproofing work, it is important to check the weather forecast. If there is a chance of rain, snow or high humidity in the near future, it’s best to wait for better conditions before undertaking any waterproofing projects. Waterproofing materials can be damaged or fail if applied in wet or humid conditions, leading to costly repairs down the line. Checking the forecast will help you plan ahead and ensure your project has the best possible chance of success. Additionally, when temperatures are too low, some materials may not adhere properly, so pay attention to the temperature range as well. By considering the weather forecast and using the right materials, you can guarantee that your waterproofing work will last.

Do a thorough inspection

Before you begin any waterproofing work, it is important to do a thorough inspection of the area in question. Start by checking the weather forecast and making sure that it is not going to rain in the near future, as this could affect the success of your project. Once you are sure of the weather, start inspecting the area around your home.

Clear out any debris or foliage that might be blocking access to water sources or draining areas, as this can impede drainage and lead to water problems in the future. Then check for any leaks in the walls, ceilings or floors that may be indicative of water infiltration. If you find any, take note of their size and location so you can make repairs accordingly.

Next, inspect the exterior of your home for any areas that might be collecting water such as gutters, downspouts, and windowsills. Make sure these are all clear and in good condition. Check the crawl space and basement for any signs of dampness, mold or mildew. This could be a sign of a leak or poor drainage system. Make sure to address these issues if you see any.

Finally, make sure to look for any signs of structural damage that could be causing water infiltration issues. This could include cracks in the walls, shifting foundations, or any other structural issues that could cause water problems in the future. By doing a thorough inspection before you start your waterproofing work, you can ensure that your project will be successful and your home will remain safe from water damage in the long run.

Clear gutters and downspouts

Gutters and downspouts are a key element of waterproofing work. It’s important to ensure that these are cleared regularly of any debris or build-up, such as leaves and sticks, to allow water to flow freely away from your home. This can help to prevent damage caused by overflowing gutters.

To clear your gutters and downspouts, it is best to start at the highest point and work your way down. This will ensure that all of the debris is cleared out, and water flows away easily. You should also check that the downspouts are connected correctly, and are not blocked by any plants or landscaping.

It is important to wear safety gear while clearing gutters and downspouts, such as gloves, a face mask, and goggles. You should also be aware of potential hazards like power lines or other obstacles.

Once you have finished clearing the gutters and downspouts, it is important to inspect them for any signs of damage or corrosion. If you find any issues, it is best to get them fixed as soon as possible, as this can help prevent further damage in the future.